Sizing tool

Sublimation Tumbler Wrap Size Chart

Start with a common tumbler preset, then use the linked calculator when your actual cup has different top, bottom, or height measurements.

Use this as a planning guide, then measure the actual blank before pressing or printing.

Rule and assumptions

Preset width uses a common starting circumference plus bleed. Custom cups should use pi x measured average diameter.

Brand and model variation can make presets wrong.
Tapered cups need measured top and bottom values.

Use this tool for

Finding a starting sublimation tumbler wrap size from a preset.
Comparing straight, skinny, tapered, and handled tumbler wrap needs.
Adding bleed or seam overlap before printing a test wrap.
Moving from a preset chart into a custom tumbler calculator.

Worked example

Inputs

Unit: inches
Tumbler preset: 20 oz skinny
Bleed / overlap: 0.25 in

Result

The preset returns a starting wrap size around 9.60 in wide by 8.20 in high.

When to use this

Use this when you need a fast starting point before measuring a common cup shape.

What to check before pressing

Measure the actual cup circumference and height, then print a paper wrap to check seam alignment.

Quick reference chart

Use case	Starting point	Check before pressing
20 oz skinny	Use as starting preset	Measure actual cup
20 oz straight	Less taper risk	Still check height
40 oz handled	Use split zones	Handle cutout required

Common mistakes

Using a preset without measuring the cup.
Forgetting seam overlap.
Ignoring handle or taper on larger tumblers.